per
انجمن علوم و مهندسی منابع آب
تحقیقات منابع آب ایران
1735-2347
2476-7360
2007-01-21
2
3
0
1
15974
پیشگفتار
Preface
محمد کارآموز
karamouz@ ut.ac.ir
1
https://www.iwrr.ir/article_15974_975d8330c24b813b9e9997663e67aa74.pdf
per
انجمن علوم و مهندسی منابع آب
تحقیقات منابع آب ایران
1735-2347
2476-7360
2007-01-21
2
3
1
12
15440
Original Article
ارزش و هزینه کامل آب : مطالعه موردی سد علویان
The Value and Cost of Water: A Case Study of Alavian Dam
سید عباس جعفری
absjafari@yahoo.co.uk
1
کارشناس ارشد اقتصاد/ وزارت نیرو
در فرایند توسعه اقتصادی کشورها که همراه با رشد فزاینده جمعیت و توسعه بخش کشاورزی میباشد، دسترسی به منابع آب مطمئن ضرورت مییابد. طرحهای تامین و انتقال آب از منظر مسایل اقتصادی و اجتماعی از جمله ارزشها و هزینههای تامین و مصرف آب مهم تلقی میگردند. لذا این مقاله به مبانی نظری و مدلهای عملیاتی برآورد هزینه و ارزش آب میپردازد. ارزشهای آب به بخشهای مستقیم و غیر مستقیم ناشی از مصرف آب، ارزشها و فواید اجتماعی و ارزش ذاتی و هزینه کامل آب نیز به بخشهای هزینههای تامین, پیامدهای اقتصادی و زیست محیطی تقسیم میشوند. نمونه منتخب مطالعاتی این تحقیق، سد علویان و شبکه پایاب آن در حوزه آبریز دریاچه ارومیه است. این سد دارای ظرفیت استحصال سالیانه برابر حجم 123 میلیون متر مکعب آب است که 101 میلیون متر مکعب آن از طریق شبکه آبیاری صوفیچای به بخش کشاورزی تخصیص یافته است. بر طبق محاسبات انجام شده هزینه کامل هر متر مکعب آب در پای سد و شبکه آبیاری به ترتیب برابر 92 و 182 ریال و بطور متوسط 174 ریال برآورد شدهاند. از طرفی مجموع ارزش آب در مصارف مختلف بعلاوه ارزشهای اجتماعی اجرای طرح در شرایط ایدهال برابر 1622 ریال و ارزش ذاتی برابر 313 ریال برآورد گردیده است.
In the process of economic development of countries facing population growth and agricultural development, the availability of safe water is of great importance. It is also crucial to consider the social and economical concerns about water exploitation and conveyance. This paper provides an overview of the theoretical issues and operational models for estimating the value and cost of water. The value of water is divided into three major factors: value in use which could be direct or indirect, social benefits, and intrinsic value. The full cost of water is composed of three items: exploitation costs, economic externalities, and environmental externalities. Alavian Dam and its irrigation system is located in the LakeOrumiehBasin. The mean annual release from the dam is 123 million cubic meters, of which around 101 million cubic meters is diverted to the Soufichai irrigation network. According to the results, the full cost of water for the dam and the irrigation network would be 92 and 182 Rial/m3, respectively with an average of 174 Rial/m3. Besides, the sum of both factors of value in use and social value is estimated to be 1622 Rial/m3. Thus the intrinsic value is estimated to be 313 Rial/m3.
https://www.iwrr.ir/article_15440_1f480c5a6553b7e3b19658e297b3f1ca.pdf
ارزش آب
ارزش ذاتی
ارزشهای اجتماعی
هزینه آب
پیامدهای زیست محیطی
Value of Water
Intrinsic value
Social benefits
Cost of Water
Environmental externalities
per
انجمن علوم و مهندسی منابع آب
تحقیقات منابع آب ایران
1735-2347
2476-7360
2007-01-21
2
3
13
26
15451
Original Article
تاثیر عدم اطمینان بر معیارهای مخاطره در مدیریت مخزن
Impact of Uncertainty on Risk indices in Reservoir Operation
آرمان گنجی
1
داور خلیلی
dkhalili@shirazu.ac.ir
2
مهران همایونفر
3
استادیار/ گروه مهندسی آب، دانشکده کشاورزی دانشگاه شیراز، ایران
استادیار/ گروه مهندسی آب، دانشکده کشاورزی دانشگاه شیراز، ایران
دانشجوی کارشناسی ارشد/گروه مهندسی آب، دانشکده کشاورزی دانشگاه شیراز، ایران.
در شرایطی که یک سیستم پیچیده مورد مطالعه قرار میگیرد یا در مورد آن اطلاعات زیادی در دسترس نیست، طراحی، پیشبینی و ارزیابی راندمانها، نتیجه نهایی اجرای پروژه و سود و زیانهای حاصله از آن چندان دقیق نخواهند بود. در چنین شرایطی ارزیابی تاثیر عدم اطمینان، حتی بر شاخصهای خطرپذیری که خود زیر مجموعهای از عدم اطمینان به حساب میآیند، ضروری است. هدف اصلی از این مقاله معرفی و بررسی تاثیر دو عامل بروز عدم اطمینان (عدم اطمینان آماری و عدم اطمینان پارامتری) بر معیارهای مخاطره مورد استفاده در شبیهسازی و بهینهسازی مخزن میباشد. در قسمت شبیهسازی، تاثیر عدم اطمینان آماری و پارامتری بر معیارهای متداول مخاطره (معیار اعتمادپذیری حجمی و معیار اعتمادپذیری شمارشی) و همچنین دو معیار دیگر مخاطره (آسیبپذیری و برگشتپذیری) بررسی میگردد. در قسمت بهینهسازی تاثیر وارد کردن عدم اطمینان بر کارایی قانون کاربری مخزن بررسی میشود. در این خصوص تاثیر عدم اطمینان آماری بر دو معیار مخاطره (قابلیت اعتماد پذیری شمارشی و هدرروی) مورد ارزیابی قرار میگیرد. برای این منظور دو مخزن در حال ساخت استان فارس برای مطالعه انتخاب میشوند. نتایج حاصل از این مطالعه نشان خواهد داد که وارد کردن عدم اطمینان (آماری یا پارامتری) بسته به واریانس جریانهای ورودی به مخزن سد و مدیریت مخزن و آب رها شده از آن، تاثیرات و نتایج متفاوتی را بر شاخصهای مخاطره ایجاد میکند. نتایج چنین تحقیقاتی میتواند طراحان را در انتخاب شاخصهای مناسب مخاطره برای مدیریت مخزن یاری دهد.
As a result of system complexity and incomplete information, the planning process, the “with” and “without” conditions, the project's performance and impacts, and the benefits and costs are never certain. Accordingly, the valuation of uncertainty is a “must”, even on the risk indices as a sub set of uncertainty. This paper focuses on the effects of two main sources of uncertainty; i.e. data and parameter uncertainty, on the risk indices in reservoir simulation and optimization. In reservoir simulation, the effects of uncertainties in simple/disaggregated time series models are studied on the well-known reservoir efficiency indices; i.e. volumetric and occurrence reliabilities. Two additional risk indices; i.e. vulnerability and resilience are also studied. A stochastic dynamic programming model (DPR) is used to study the effects of data continuity uncertainty on reservoir operation rule. In this case the effects of data continuity uncertainty on two indices of Reliability and Losses have been evaluated. Two reservoirs under construction in Fars province, IRAN, have been selected for case study. The results show that the incorporation of uncertainty (i.e. data/parameter uncertainty) in simulation and optimization impact the risk indices differently as the flow variability condition and reservoir storage and operation changes. These results can help the designer to select the appropriate risk indices for reservoir operation.
https://www.iwrr.ir/article_15451_b3e1539980bc671cac5915a350f6584c.pdf
خطرپذیری
عدم اطمینان
مدیریت مخزن سد
risk
Uncertainty
Reservoir management
per
انجمن علوم و مهندسی منابع آب
تحقیقات منابع آب ایران
1735-2347
2476-7360
2007-01-21
2
3
27
38
15452
Original Article
تحلیل مکانی شاخصهای خشکسالی SPI وEDI در استان تهران
Assessment of Spatial Analysis of SPI and EDI Drought Indices in Tehran Province
روح انگیز اختری
1
محمد حسین مهدیان
mahdian.mhossein@gmail.com
2
سعید مرید
morid_sa@modares.ac.ir
3
دانشجوی کارشناسی ارشد /سازههای آبی، دانشگاه تربیت مدرس
استادیار /پژوهشکده حفاظت خاک و آبخیزداری کشور
استادیار/ دانشگاه تربیت مدرس
سیستمهای پایش در تدوین طرحهای مقابله با خشکسالی و مدیریت آن از اهمیت زیادی برخوردار هستند که بدین منظور از شاخصهای خشکسالی برای بیان کمی این پدیده استفاده میگردد. اما معمولا این شاخصها به صورت نقطهای محاسبه میشوند و لازم است تا به صورت مکانی پردازش شده و نقشههای مربوط ارائه گردند. روشهای زمینآمار از جمله تکنیکهائی میباشند که میتواند در این راستا مورد استفاده قرار گیرد و این در صورتی است که متغیر مورد بررسی یک متغیر مکانی باشد. تحقیق حاضر تلاشی است برای تحلیل مکانی شاخصهای خشکسالی و تهیه نقشههای مربوط که در آن سعی شده ابتدا با توجه به استاندارد شدن بارندگی برای محاسبه این شاخصها، متغیر مکانی بودن آنها مورد بررسی قرار گیرد. در مرحله بعد روشهای مختلف زمین آماری شامل روشهای کریجینگ، کوکریجینگ، TPSS با و بدون متغیر کمکی و میانگین متحرک وزندار (WMA) برای تحلیل مکانی آنها مورد ارزیابی واقع شود. پایش خشکسالی براساس شاخصهای SPI و EDI با استفاده از آمار و اطلاعات 43 ایستگاه در سطح استان تهران انجام و سپس نقشههای خشکسالی تهیه و ارزیابی شده است. نتایج تحقیق ضمن تأیید متغیر مکانی بودن شاخصها، نشان داد که هر چند روش کریجینگ از دقت بالاتری برخوردار بوده است ولی با لحاظ نمودن سرعت عمل و استفاده از این نتایج در سیستمهای پایش فعال، روش میانگین متحرک وزندار نیز دقت کافی را دارا است.
Drought monitoring is quite important in planning for drought mitigation schemes. Drought indices are normally used for monitoring purposes. However, the indices are calculated at sites and it is required to estimate the spatial distribution of drought in the forms of maps. Geostatistical methods are among such tools that may be applied for preparing spatial distribution maps. In this research, several geostatistical methods including Kriging, Cokriging, TPSS with and without secondary variables as well as weighted moving average (WMA) were assessed with respect to derivation of drought index maps. Drought monitoring and mapping was conducted based on SPI and EDI indices using data of 43 rain gauge stations within Tehran province. The results indicated that although Kriging was the most accurate method, WMA provided reasonable accuracy blended with more efficient computer time, a major consideration in monitoring systems.
https://www.iwrr.ir/article_15452_a57d6709be37ee85ac5da01883998a43.pdf
خشکسالی
زمین آمار
SPI
EDI
کریجینگ
میانگین متحرک وزندار
TPSS
Drought
Geostatistics
SPI
EDI
Kriging
WMA
TPSS
per
انجمن علوم و مهندسی منابع آب
تحقیقات منابع آب ایران
1735-2347
2476-7360
2007-01-21
2
3
39
50
15453
Original Article
مقایسه روشهای استخراج خطوط همزمان پیمایش برای استفاده در روش روندیابی زمان – مساحت
Isochrones Mapping Methods in Time-Area Routing Technique
علیرضا شکوهی
shokoohi@ikiu.ac.ir
1
بهرام ثقفیان
b.saghafian@gmail.com
2
استادیار/ دانشگاه ببنالمللی امام خمینی (ره)، قزوین، ایران
دانشیار/ مرکز تحقیقات حفاظت خاک و آبخیزداری، تهران، ایران
روش زمان - مساحت یکی از مناسبترین و سادهترین تکنیکهای روندیابی حوضهها میباشد و بالقوه میتواند به عنوان یک مدل توزیعی مورد استفاده قرار گیرد. کاربرد روش زمان - مساحت با نرم افزارهای GIS به سهولت امکانپذیر است. در این مقاله روشهای موجود برای تعیین موقعیت خطوط همزمان پیمایش (ایزوکرون) در مقایسه با روش تحلیلی موج سینماتیک مطالعه شدهاند. در بسیاری از روشهای موجود، زمان پیمایش با فرض تناسب زمان تمرکز با توانی از فاصلة نقاط تا خروجی حوضه، تعیین میشود. در این تحقیق با بررسی طیفی از توانها نشان داده شده است که در صورت در نظر گرفتن جهت صحیح حرکت موج و تعیین موقعیت خطوط هم پیمایش از بالادست حوضه به سمت پایین دست، توان مناسب برای آنکه استفاده از روش زمان – مساحت نزدیکترین هیدروگراف را به راه حل تحلیلی موج سینماتیک بدست دهد کدام است. بدین ترتیب به کمک نتایج این تحقیق میتوان از این پس بجای استفاده از روشهای تجربی تولید خطوط همزمان پیمایش ، از روشی مبتنی بر هیدرولیک امواج استفاده نمود.
The Time–Area method is a suitable technique for watershed routing and can be potentially used as a distributed model. As an advantage, it can also be used as a GIS-based method. The performance of the existing methods for deriving isochrone locations is compared in this study with that of the kinematic wave theorem. In most methods, travel time is proportional to the distance-to-outlet of any point raised to a power. Investigating the numerical value of powers, it is shown that exponent 1.5 of Laurenson’s method yields the closest time-area hydrograph to that of the kinematic wave solution. Therefore, this paper showed that certain empirical isochrone delineation methods could be applicable provided that the travel length is measured towards the outlet.
https://www.iwrr.ir/article_15453_bbdb82d54612e5aba721efd50c90d606.pdf
زمان – مساحت
موج سینماتیک
زمان تعادل
خطوط همزمان پیمایش
طول جریان
Time-Area
Isochrones mapping
Kinematics wave
Time to equilibrium
Travel length
per
انجمن علوم و مهندسی منابع آب
تحقیقات منابع آب ایران
1735-2347
2476-7360
2007-01-21
2
3
51
65
15454
Original Article
تحلیل منطقه ای برآورد رسوب معلق درحوضه اصفهان و سیرجان
Regional Analysis of Suspended Sediment Estimation in Esfahan and Sirjan Watersheds
سید حمیدرضا صادقی
sadeghi@modares.ac.ir
1
درعلی نجفی
2
مهدی وفاخواه
vafakhah@modares.ac.ir
3
مدیر و دانشیار /گروه مهندسی آبخیزداری، دانشکده منابع طبیعی، دانشگاه تربیت مدرس، مازندران، نور
دانش آموخته /گروه مهندسی آبخیزداری، دانشکده منابع طبیعی، دانشگاه تربیت مدرس، مازندران، نور
مربی /گروه مهندسی آبخیزداری، دانشکده منابع طبیعی، دانشگاه تربیت مدرس، مازندران، نور
تعداد کم ایستگاههای رسوب سنجی و محدودیت تعداد سالهای دارای آمار و همچنین تعداد کم نمونه برداریها در وقایع سیلابی بویژه در مناطق خشک و نیمه خشک کشور، تجزیه و تحلیل بار رسوب رودخانهها را با مشکل مواجه کرده است. از این رو استفاده از ابزارهای تحلیل منطقهای جهت دستیابی به مدلهای مناسب برآورد بار رسوبی ضروری به نظر میرسد. با هدف دستیابی به چنین مدلهایی، این مطالعه در حوضه اصفهان و سیرجان واقع در منطقه مرکزی ایران با وسعت حدود 99300 کیلومتر مربع انجام شده است. در این تحقیق میانگین تولید رسوب روزانه زیرحوضهها به عنوان متغیر وابسته و 49 ویژگی فیزیوگرافی، هیدرولوژیکی، کاربری اراضی، زمین شناسی و اقلیمی مربوط به 14 زیرحوضه منتخب با طول دوره مشترک آماری 11 سال به عنوان متغیرهای مستقل انتخاب شدند. جهت دستیابی به مناسبترین شیوه تهیه مدل وایازی (رگرسیون) از روشهای مختلف تجزیه و تحلیل چند متغیره نظیر تجزیه و تحلیل عاملی، خوشهای و تفکیکی استفاده گردید. در نهایت دو مدل وایازی با حداکثر و میانگین خطای تخمین به ترتیب 19/35 و کمتر از10 درصد مربوط به دو منطقه همگن با بکارگیری روش تجزیه و تحلیل عاملی و انتخاب یک نماینده در هر محور و با در برداشتن متغیرهایی نظیر دبی پیک با دوره بازگشت 20 سال، درصد اراضی مرتعی و نمره ناهمواری به عنوان مناسبترین مدلها جهت برآورد میانگین تولید رسوب معلق روزانه زیرحوضهها انتخاب گردید.
Limited number of sediment stations and recorded data, together with the inaccurate and insufficient sediment samples in flood events have doubted the river sediment load analysis especially in dry and semi-dry areas. Accordingly the regional analysis seems to be a useful tool aiming appropriate models for estimating sediment loads. In this study the model results are compared for sediment load estimatin in Esfahan and Sirjan watersheds, located in central Iran and comprise 99300 Km2 in area. For 14 sub-watersheds having 11 years of compatible data records the mean daily suspended sediments and 49 physiographic, hydrologic, land use, geologic and climatic characteristics were used respectively as criterion and predictor variables. The multivariable regression techniques were applied with the help of factor analysis, clustering, and discriminant analysis to access the most suitable regression models. The results revealed that two regression models developed for two homogeneous regions could acceptably model the variations. The respective maximum and mean relative error of these models were 35.19 and less than 10%, respectively, obtained from factor analysis technique and selecting one representative variable in every component. The most suitable variables for estimation of mean daily suspended sediment yield of sub-watersheds are the peak discharge with 20 years return period, rangeland percentile, and ruggedness number.
https://www.iwrr.ir/article_15454_5d1c93df53559be802c28456b6e5c2f4.pdf
تجزیه و تحلیل منطقه ای
حوضه اصفهان و سیرجان
مدل رسوب
باتلاق گاوخونی
Regional analysis
Esfahan and Sirjan Watershed
Sediment Modeling
Gavkhuni Swamp
Iran
per
انجمن علوم و مهندسی منابع آب
تحقیقات منابع آب ایران
1735-2347
2476-7360
2007-01-21
2
3
66
77
15455
Original Article
مطالعه پدیده انتقال رسوب ساحلی در جهت عمود بر ساحل با استفاده از مدل فیزیکی و ریاضی
Investigation of Cross Shore Sediment Transport Using Physical and Numerical Methods
میر احمد لشته نشایی
1
ایوب متین سرشت
2
مرتضی منشی زاده
3
فرید حاتمی
4
استادیار /گروه عمران، دانشکده فنی دانشگاه گیلان
مربی /گروه معماری، دانشکده معماری دانشگاه گیلان
کارشناس /مرکز تحقیقات آب وابسته به وزارت نیرو
دانشجوی کارشناسی ارشد/سازه، دانشکده فنی دانشگاه گیلان
در این مقاله پدیده انتقال رسوب ساحلی در جهت عمود بر ساحل و تغییرات بستر سواحل در اثر تکرار این پدیده با استفاده از دو روش مدل فیزیکی و ریاضی بررسی شده است. نتایج آزمایش با استفاده از مدل فیزیکی ساخته شده نشان داد که در دانهبندی مصالح رسوبی، با افزایش مصالح مورد استفاده از شدت تخریب ساحل کاسته شده و پشته ایجاد شده به سمت ساحل متمایل گردیده و ارتفاع آن نیز کاهش یافته است. همچنین با افزایش شیب ساحل شبیهسازی شده، شدت تخریب ساحل شدیدتر و پشته ایجاد شده به سمت دریا متمایل گردیده و ارتفاع آن نیز کاهش یافته است. در بررسی دانهبندی مصالح و شیب ساحل نیمرخهای ساحلی زمستانه تشکیل گردید در حالیکه در تأثیر ارتفاع موج، نیمرخ تابستانه نیز تشکیل گردید. آزمایشها برگشتپذیری پدیده انتقال رسوب عمود بر ساحل را نیز تأیید کردند. در مدل ریاضی از برنامه (Littoral Processes and Coastline Kinetics) Litpack موسسه DHI دانمارک استفاده شد که مقایسه نتایج آن با مدل فیزیکی نشان داد که این مدل شرایط واقعی را پیشبینی مینماید و دقت آن در شرایط مدل فیزیکی به دلیل تأثیرات ناشی از مقیاس بسیار کم است.
Efforts have been made to estimate the sediment transport and beach profile evolution during storm conditions based on surf zone hydrodynamics. This study compensates, to some extent, for the lack of information describing the coastal processes, particularly cross shore sediment transport and short term beach profile evolution in response to storm events. In this regard, following extensive series of experiments, the Litpack model is used to predict the beach profile evolution in an artificial beach. The profile evolution results predicted by the model compared to those found in the experimental measurements are illustrated clearly. The accuracy of the model is still to be improved; nevertheless, the results illustrate the feasibility of the Litpack model to predict the beach profile evolution in coastal regions. The main objectives of these experiments were to undertake a quantitative comparison of cross shore sediment transport and beach profile evolution with different sizes of sand. Increasing the size of beach material results in reduction in cross shore sediment transport and beach profile evolution for coarse beaches. The results obtained from the model compared to the experimental results are promising and encouraging for further modeling developments. Comparison of the results obtained from experiments and numerical models show that the Litpack program can predict the full scale behavior of beaches with reasonable accuracy, however, due to the scale effects its prediction for the laboratory conditions is not very decisive.
https://www.iwrr.ir/article_15455_7300bc9ff31ad0c710cb9ba7ff7bfef4.pdf
موج
جریان ساحلی
رسوب ساحلی
نیمرخ زمستانه
نیمرخ تابستانه
Wave
Current
Shoreline
Coastal Sediment Transport
Winter profile
Summer profile
per
انجمن علوم و مهندسی منابع آب
تحقیقات منابع آب ایران
1735-2347
2476-7360
2007-01-21
2
3
78
89
15463
Original Article
مقایسه خصوصیات جریان در مدل فیزیکی با نتایج مدلهای ریاضی یک بعدی، شبه دوبعدی و دوبعدی در یک بازه رودخانه
Comparison of Flow Characteristics in a Physical Model with 1D, Quasi-2D, and 2D Numerical Models in a River Reach
مهدی یاسی
m_yasi@yahoo.com
1
بهزاد عزیزپناه
2
دانشیار /مهندسی رودخانه، گروه مهندسی آب، دانشگاه ارومیه
فارغ التحصیل کارشناسی ارشد /سازه های آبی، دانشگاه ارومیه
کاربرد مدلهای ریاضی در طرحهای مهندسی رودخانه اجتناب ناپذیر است. با این وجود، نیاز حداقل به اطلاعات صحرایی، حجم محاسباتی اندک و درجه اعتماد مدلهای ریاضی در رودخانهها باید مورد نظر قرار گیرد. هدف اصلی در تحقیق حاضر، مقایسه نتایج شبیه سازی جریان پایدار از مدلهای ریاضی شناخته شده با نتایج نظیر از یک مدل فیزیکی رودخانه ای بوده است. برای این منظور، مدل فیزیکی بستر ثابت یک بازه از رودخانه نازلو (با مقیاس افقی 1:100 و قائم 1:20) طراحی، ساخته و مطالعه گردید. برای شبیهسازی جریان، مدل ریاضی یک بعدی HEC-RAS، مدل شبه دو بعدی BRI-STARS، و مدل دو بعدی سطح افق FAST-2D انتخاب گردید. پارامترهای مشترک جریان برای پنج شدت جریان مختلف، در سه زیر بازه رودخانهای (پایین دست پل، پل نازلو ، و بالادست پل)، در شرایط اولیه و مرزی مشترک مقایسه گردید. بطورکلی در بازه مورد مطالعه، این سه مدل بترتیب تطابق بهتری را با مدل فیزیکی داشتهاند. متوسط خطای نسبی برآورد جریان از سه مدل فوق بطور نمونه برای ارتفاع سطح آب بترتیب 8/1، 2/2 و 5/5 درصد؛ و برای سرعت متوسط 2/10، 0/9 و 6/12 درصد بوده است. در طرحهای رودخانهای، کاربری هریک از سه مدل فوق با توجه به محدوده اطمینان ارائه شده در این بررسی توصیه میگردد.
Numerical models are being used widely in river engineering projects. However, the reliability of these models, minimum field data requirement, and the optimal computational processes are of major concern. This study compares the simulated steady flow parameters from a well-known numerical models with that of a true river physical model. A fixed-bed model is developed for the nazloo river, IRAN, with horizontal scale of 1:100 and vertical scale of 1:20. Results from HEC-RAS (1D), BRI-STARS (quasi 2D), and FAST-2D (2D) were compared for corresponding flow parameters under similar initial and boundary conditions. This was made for five different flows in three sub-reaches along the river (i.e. downstream of a bridge, bridge reach, upstream of the bridge). The best adapted results were produced by HEC-RAS. BRI-STARS and FAST-2D models took the next ranks respectively. the averaged predictive errors were rated 1.8, 2.2, and 5.5 percent for water surface elevations and 10.2, 9, and 12.6 percent for mean velocities, respectively. The application of each model is recommended in river projects subject to the inclusion of the degree of certainties provided by the present study
https://www.iwrr.ir/article_15463_a28f611b811cc7040de8296bf92bbc7e.pdf
مدل فیزیکی
مدل HEC-RAS
مدل BRI-STARS
مدل FAST-2D
Physical Model
HEC-RAS model
BRI-STARS model
FAST-2D model
per
انجمن علوم و مهندسی منابع آب
تحقیقات منابع آب ایران
1735-2347
2476-7360
2007-01-21
2
3
90
92
15464
Original Article
مقیاسبندی مکانی جریانهای کم
Low Flows Spatial Scaling
رضا مدرس
r_m5005@yahoo.com
1
دانشکده منابع طبیعی، دانشگاه صنعتی اصفهان
در تحلیل فراوانی منطقهای متغیرهای هیدرولوژیک، اطلاعات یک یا چند ایستگاه به یک ناحیه تعمیم داده میشود. در این حالت فرض بر این است که تغییرات این اطلاعات در منطقه با ضریب مشخصی صورت میگیرد که به آن مقیاس گفته میشود. در این مطالعه ویژگیهای مقیاسبندی جریانهای کم 7 روزه در 19 حوزه استان مازندران مورد بررسی قرار گرفت. مقیاسبندی بیانگر نسبت ویژگیهای احتمالی جریانهای کم با مساحت است. اگر این نسبت که توان مقیاس خوانده میشود، با مساحت رابطه خطی داشته و رابطه معنیداری با رتبه گشتاورهای وزنی احتمال نداشته باشد، جریان کم دارای مقیاسبندی ساده خواهد بود. در این مطالعه مشخص شد رابطه لگاریتم مساحت و لگاریتم گشتاورهای وزنی احتمال رتبه 1 تا 10 خطی بوده و تغییرات توان مقیاس رابطه معنی داری با گشتاورهای وزنی احتمال ندارد و بنابراین جریانهای کم 7 روزه در استان مازندران دارای مقیاسبندی ساده هستند.
In hydrologic regional frequency analysis, information of one or more stations are generalized for a region. In this case, the variation of this information is assumed to have a defined coefficient called scale. In this study, scaling properties of 7-day low flow of 19 basins in Mazandaran province in northern Iran were investigated. Scaling implies the relationship between probabilistic features and the area of the basin. If this exponent (called scaling exponent) has a linear relationship with drainage area and does not include a significant relationship with probability weighted moments, low flow is called “simple scaling”. The study showed that the logarithm of the drainage area and the logarithm of the probability weighted moments of order 1 to 10 are linear and the scaling exponent did not have a significant relationship with probability weighted moments. Acordingly the 7-day low flows of Mazandaran province are simple scaling.
https://www.iwrr.ir/article_15464_1cfa0fccf9c49ce13c5e1e8d980d2026.pdf
مقیاسبندی
جریانهای کم
توان مقیاس
هیدرولوژی ناحیهای
ضریب تغییرات
scaling
Low flows
Scaling exponent
Regional hydrology
Coefficient of variation